6th Gen 4Runner TRD Pro Dash TOYOTA Letters, Curved Fitment

The 2025 plus 6th Gen 4Runner TRD Pro and Trailhunter trims come from Toyota with a TOYOTA badge on the passenger side dash panel. Other trims like Sport and TRD Off Road do not. If you want that TRD Pro-style dash look on your 6G 4Runner, this is the cleanest way to do it.

There are TOYOTA dash letter sets on the market, but most are 3D printed as flat letters. The problem is that the 6th Gen 4Runner dash surface has a subtle curve, so flat letters tend to rock, lift at the edges, or look slightly off once installed. Other products on the market recommend heating each letter with a heat gun and manually curving the letters around the dash. However, this approach poses problems, as it can overheat the letters and damage them, or worse, cause burns when using a heat gun on the letters.

We designed something better!

We designed these letters with an integrated curve to match that dash profile curve, so they sit on the passenger side dash panel with a factory-style fit - no heat gun needed. The letters have already been precision fit to the dash curve on the 6th Gen 4Runner. 

Special Color Requests: 

Please email sales@4runnermods.com or text 916-805-6432, and we will do our best to get your preferred color made to order. 

Key Features

• Designed specifically for the 2025 plus 6th Gen Toyota 4Runner passenger side dash panel
• Contoured profile to match the slight dash curvature for a flush sit
• Clean TRD Pro and Trailhunter style TOYOTA dash appearance
• 3M double-sided adhesive on each letter for a secure, lasting hold
• Interior use only, intended for the dash panel application

What’s Included

• Complete TOYOTA letter set
• Optional 3M double-sided adhesive on each letter

Installation

Clean the dashboard area with a damp microfiber towel to remove dust and debris. Wipe the surface with isopropyl alcohol using a clean cloth. Allow the area to fully dry before placing any letters.

Step 1. Install Template

Line up the template with the dash. The template has been designed to sit flush against the top and bottom curvature lines on the dash. Use a bit of masking tape to help hold the template in place on the dash. Note: Do not move the template back and forth on the dash, or you risk scratching your dash plastics. 

Step 2. Apply VHP Tape on Letters

Depending on how your kit came, you may need to apply 3M VHB tape. Start by applying the 3M tape to the backside of each letter.

Step 3. Apply Letters

Once the 3M tape has been applied, you can start placing your letters into the correct location on the template. The "Ts" and the "Os" are the same shape, so don't worry about mixing those up. Test position the letters first, then peel the backing from the adhesive and press each letter firmly into place. Apply steady pressure on each letter to ensure full adhesive contact against the curved surface.

Step 4. Remove Tape & Template

After the letters have been installed. You can remove your masking tape and then gently pull up on the template to remove it. 

That's it!

Notes and Use

• Designed for interior dash use only
• Exterior placement is not recommended and may cause fading over time

Notice of Non-Affiliation and Disclaimer: 4RunnerMods is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Toyota, or any of its subsidiaries or its affiliates. The name TOYOTA, 4Runner, as well as related names, marks, emblems, and images are registered trademarks of their respective owners, including Toyota.