CBI Off-Road Super Stock Low Profile Winch Bumper For 2025+ Toyota 4Runner
One of the first low-profile bumpers to hit the market for the 6g 4Runner was the CBI super stock. CBI was quick on the scene to R&D and then manufacture a killer front bumper option for the 2025+ 4Runner.
It's got everything you know and love in a low-profile bumper:
- Strong winch mount
- Light cutouts for additional front-end fog lights
- Easy fairlead and shackle install
- Easy access for the winch clutch 7 winch control box
- Steel design so you know it's strong
If you want front end protection without going full width, the CBI Super Stock low profile bumper is a clean option for the 6G 4Runner.
It looks factory, adds impressive functionality, and only requires cutting of the lower valance plastics.
After we installed and tested this bumper, everyone in the shop was a fan. It looks great and really feels like a "super stock" addition to the front end of the new 6th gen 4R.
Easy Install
We had the factory bumper off and the CBI Super Stock on in about 3 hours. The 6th Gen makes winch fitment straightforward, and there is no need to move intercooler lines like some 5th Gen LoPro bumpers.
Pulling the bumper apart was the most challenging part. You have to separate the lower valance from the bumper plastics and there are about 20 tiny screws and the same amount of clips holding the lower valance on to the main bumper plastics. Once you have the lower valance off though, everything else is a piece of cake. Very easy, simple installation process for this bumper.
If you have any questions or would like a walkthrough over the phone, give us a call or shoot us an email. Contact 4Runner mods.
Construction and Mounting
Here is a behind-the-scenes look at the bumper and how it mounts to the frame rail on the 4Runner.
The bumper mounts to the frame with five 19 mm bolts per side. For comparison, most 5th Gen bumpers use three 14 mm bolts. It includes a winch mount plate, two 5/8 welded recovery points, and access ports for the winch clutch.
Key Features
- Designed for the 2025 Toyota 4Runner
- Heavy duty steel (7 gauge and 10 gauge)
- Winch ready supports 10,000 lb winch
- 2" LED pods (Baja Designs S2 or Rigid SR)
- OEM lines
- Works with CBI skid plates or the OEM TRD skid plate
- Integrated recovery points sized for standard Bow and Soft shackles
- Black textured powder coated finish
- Weight: Roughly 60lbs
Product Review
This bumper fits the front end of the new 6G incredibly well, adds strength where it matters because it's steel and connects the frame rail where the factory crash bar was.
Weighing in at roughly 60lbs, the weight on this bumper is also not bad at all, all things considered being steel.
If you want a low profile winch solution for the 6th Gen 4Runner with additional light cutouts and a very sleek look, CBI did a great job with this one and we have loved testing this unit.
You will love it too.
Additional Photos of the CBI Super Stock 6th Gen 4Runner Bumper
