DR KDSS Trackbar Correction Kit (B.O.T.C.K.) – 6th Gen 4Runner: Review & Overview
Once you lift a 2025+ 4Runner, you’ll quickly notice changes in how the rear end of your rig behaves. The stock panhard bar angle is tuned for factory ride height. As soon as you add lift, that angle shifts, which causes the axle to move unnaturally. At first it’s subtle, but with more height comes more wander, less stability, and a rear end that just doesn’t feel as planted as it should.
The DR KDSS Bolt-On Trackbar Correction Kit (B.O.T.C.K.) solves this issue. By raising the axle-side pivot point and re-leveling the panhard bar, it restores proper suspension geometry so the 4Runner tracks straight and handles like Toyota intended. If you’re investing in a lift, this kit is the step that ensures your upgrade performs the way you expect.
Why You Would Want It
Most relocation brackets that come with lift kits cut corners by relying on a single bolt, thin steel, and minimal support. Over time they flex, shift, and introduce play where you don’t want it. The B.O.T.C.K. eliminates these weak points with a wrap-around, double-shear bracket that ties into the OEM mount from multiple sides. Instead of moving under stress, it stays locked down and spreads the load evenly.
That translates into your 4Runner feeling more stable, more predictable, and more capable both on the highway and in technical terrain.
Key Features
- Geometry Correction: Restores panhard bar angle, keeping the rear axle centered through travel.
- Wrap-Around Bracket: Double-shear design for maximum durability and strength.
- Secure Retention: Anchored with three Grade 8 bolts plus OEM hardware, torqued to 120 ft-lbs.
- Force Distribution: Includes a custom washer plate to spread loads across the OEM mount.
- Quick Install: Fully bolt-on, install takes about 15 minutes with basic hand tools.
Why Choose This Over Kit Brackets?
The B.O.T.C.K. is not just a generic relocation bracket. The basic steel pieces that come with most lift kits are temporary at best, thin material, single-bolt retention, and prone to shifting. The DR KDSS kit is engineered to be a permanent fix. It’s designed to handle trail abuse and keep your 4Runner tracking straight when it matters most.
Without it, your suspension geometry stays off, the axle wanders, and stability suffers. With it, the rear end cycles the way Toyota engineered it, just corrected for your lift height.
Why We Recommend It
We recommend this track bar relocation kit for every lifted 6th Gen 4Runner. It restores confidence behind the wheel, eliminates unwanted rear steer, and protects the money you’ve already put into your lift. It’s a one-time install that makes a difference every time you drive.
Take 5% off DR KDSS parts with code: 6g4rpanhard
Shop the DR KDSS B.O.T.C.K. for 6th Gen 4Runner →
Product Review
There is only one high-quality option on the market at the time of writing, for relocation of the panhard bar. DR. KDSS makes one of the best, if not THE BEST, panhard (track bar) relocation brackets for the 6th Gen 4Runner.
The kit comes with everything you need to install it out of the box and the install is very simple. A few bolts and the brackets—and you’re done. We highly recommend this product if you’re looking to lift your 6th Gen 4Runner.
Comment below, and let us know if you have any questions.
We’re always around and happy to help you better understand this product if needed.